Makita XAD06T 18V LXT Brushless 7/16-in Hex Right-Angle Drill Kit (5.0Ah) review

The Makita XAD06T is an earlier 18V LXT right-angle drill kit using the XAD06Z drill body. Makita's exact U.S. page marks XAD06T discontinued. Its linked New Tool Overview identifies a 7/16-in hex holder and lists two BL1850B 5.0Ah batteries, a DC18RC rapid charger and tool bag. The kit's 7/16-in interface is a substantive distinction from XAD05T, whose drill has a keyed 1/2-in chuck. The status, contents and functions below come from the maker's exact SKU page, flyer and manual—not from handling the tool.

The kit package and what the suffix changes

The XAD06T flyer lists two identical model BL1850B packs, both rated 5.0Ah, and a DC18RC charger, so the published package is more fully specified than a generic “kit” label. The written equipment list also names a tool bag. The XAD06T image shows those parts together, but package quantities and model numbers follow the text. Makita's linked manual identifies the approved XAD05/XAD06 battery and charger families; check the actual delivered labels if evaluating an older box, and do not infer included power equipment from a separate XAD06Z tool-only listing.

Unlike a key-operated drill chuck, XAD06's sleeve takes the specific 7/16-in hex bit shank described in the manual. It is a useful choice only for the correct shank; it is not a hidden 1/2-in chuck or a substitute for a compatible round-shank holder. The matched package is also distinct from XAD05T's kit: XAD05 uses a keyed 1/2-in chuck, while XAD06 requires the hex bit and does not meet this site's half-inch chuck capacity boundary. That finding is about the bit interface, not about material capacity.

Bit limits and gear selection need to travel together

The manual lists steel capacity as 1/2 in. For wood it gives a 1-1/2-in auger in either gear; a 2-in self-feed bit in high or 2-9/16 in in low; and a 4-in hole saw in high or 5 in in low. Those are manufacturer limits for named bit/mode pairings, not a universal capacity promise. Makita's product material also gives a 7/8-in ship-auger per-charge example with a specified 5.0Ah battery and lumber, but that is a maker-stated example, not a test of this kit or a guarantee for different material, bit sharpness, operator technique or battery condition.

The manual says to stop the drill before changing gears or direction. If the high-speed drill slows significantly, stop and select low rather than continuing to overload it. It warns that the tool develops high torque; hold and brace it as instructed, secure the workpiece and be ready for the force at breakthrough or if a bit binds. Its instructions discuss drilling, not integrated hammer drilling or a clutch setting, so masonry hammer mode or controlled screw-driving should not be assumed from the word “drill.”

Reach, weight and lifecycle limits

Makita gives 17-1/8 in overall length; the XAD06 manual does not identify that as tool-head length. No measurement in the supplied sources proves that the tool head is six inches or less. In a narrow bay, allow for the right-angle head, the bit, battery at the rear, hand placement and approach angle. A clearance test on paper based only on overall body length is insufficient, and no exact head dimension has been located.

The maker's materials publish a 7.6-lb weight with battery, while the manual gives a 6.2–7.1-lb range that varies with battery and attachments. Those figures differ and neither is a bare-tool weight; keep the disagreement visible. The XAD06T page's discontinued label is a lifecycle note, not a statement about current seller stock, wear or completeness. Confirm the T suffix, the two batteries, DC18RC and bag if considering an old kit, and inspect the actual box and pack labels rather than relying on a generic title.

Verdict from the documentation

XAD06T is an earlier kit to investigate when the required combination is a right-angle drill, 7/16-in hex bit shank and a package with two named 5.0Ah LXT batteries and charger. It should be ruled out if a 1/2-in keyed chuck is essential; compare the separate XAD05T or keyed XAD05Z only after checking their package and lifecycle. The discontinued status, weight discrepancy, missing head measurement and application-specific bit limits all matter. This is an assessment of documentation, not hands-on or performance evidence, and makes no claim of current availability, price or seller condition.

Sources: Makita XAD06T U.S. product page; Makita XAD06T New Tool Overview; Makita XAD05/XAD06 instruction manual.