Makita XAD04PT 36V (18V X2) LXT Brushless 7/16-in Hex Right-Angle Drill Kit (5.0Ah) review

The Makita XAD04PT is a 36V (18V X2) LXT right-angle drill kit built around the XAD04Z body. Its key difference from the XAD03 is the tool-less 7/16-in hex sleeve rather than a keyed 1/2-in chuck. The exact product page lists two 5.0Ah BL1850B batteries, a DC18RD charger, tool bag and side handle. A separate page-versus-flyer detail about the battery count and a page-only “chuck key” listing make the written package worth checking carefully. This research assessment does not reflect use or testing.

Read the exact kit list, not just “5.0Ah”

Makita’s XAD04PT product page specifies two BL1850B 5.0Ah packs and a dual-port DC18RD charger. Its linked flyer’s standard-equipment text names a BL1850B battery but does not state a quantity; the flyer image depicts two packs. The exact page is the specific source for the two-count claim, while the package should still be checked against the box and seller’s written list. Both documents identify a tool bag and side handle.

There is a second item to resolve: the product page’s included list names a chuck key, but the XAD04 manual describes a sliding, tool-less 7/16-in hex sleeve, and the linked flyer’s equipment list does not name a chuck key. The sleeve instructions—not the accessory-list wording—define how this model holds a bit. Treat the chuck-key line as unconfirmed and ask for the exact package contents if that accessory matters. Do not let a product-page listing turn a hex holder into a keyed chuck.

Hex shank and drilling limits are separate facts

The manual calls for a 11.2-mm (7/16-in) hex bit shank inserted fully into the sleeve. That makes XAD04PT distinct from the keyed 1/2-in XAD03PT. In the finder’s bit-interface question, XAD04 does not meet the documented 0.5-in chuck-capacity requirement. Yet the manual’s material table separately lists steel drilling up to 1/2 in; a hole-size capacity for a named material is not the size of the tool’s bit holder.

For wood, Makita lists a 2-in auger in either gear, a self-feed bit up to 2-9/16 in in high or 4-5/8 in in low, and a hole saw up to 4-1/8 in in high or 6-1/4 in in low. The two no-load ranges are 0–1,400 rpm high and 0–350 rpm low. These are model-manual limits for particular bit types and gears, not independent performance results or a blanket promise for any material. The manual’s torque limiter operates in low speed and disconnects the output when its threshold is reached; large bits still require the supplied side grip, firm bracing and secured workpieces.

Reach, weight and what the specifications cannot answer

Makita reports 21-1/4 in overall length and 13.1 lb with battery on the exact product page. The XAD04 manual gives an 11.9–13.2 lb range depending on attachments, including the battery. Those are not bare-tool weights. The 21-1/4-in figure also does not measure the tool head; no exact head length is stated. A right-angle layout can help change the direction of approach, but it does not establish whether the complete drill, installed bit, two packs, hands and side handle fit a particular gap.

The kit’s two-pack arrangement is a 36V X2 tool powered by two 18V LXT batteries, not a single 36V battery. The manual lists approved cartridge and charger families, including DC18RD; match the supplied models and the exact drill instructions. Neither the “LXT” label nor a familiar-looking battery alone is proof that any pack or charger combination is approved.

Who should compare XAD04PT

Shortlist it when the intended accessories use the 7/16-in hex interface, the work calls for an angle-drill form, and a two-pack LXT kit suits the plan. Compare XAD03PT if the bit requires a conventional keyed 1/2-in chuck. The XAD04PT is a different package from discontinued XAD04Z and from the single-pack XAD06; the model family name does not erase those suffix distinctions.

Before choosing, verify XAD04PT, the number and labels of the included batteries, charger, bag and handle, and the ambiguous chuck-key line. Then check the exact bit shank, material, selected gear, manual limits and real clearance. The maker’s page and flyer document a useful setup, but they do not establish current seller stock, price, completeness of an individual box or a verified fit in a particular space.