Makita GT200D 40V max XGT Brushless 2-Pc. Combo Kit (2.5Ah) with GPH01Z Hammer Drill review

Makita GT200D is a current-reference 40V max XGT two-tool combo kit built around the GPH01Z hammer driver-drill. Its exact U.S. page lists a separate GDT01Z impact driver, two BL4025 2.5Ah batteries, a DC40RA charger and a tool bag. That package is materially different from the GPH01Z tool-only SKU: the kit page, rather than the tool-component page, determines what is supplied. This is a document-based assessment, not a hands-on test or a claim about present stock.

One hammer drill and one separate impact driver

The drill component is a brushless, two-speed 1/2-in hammer driver-drill. The GPH01 manual documents drilling, screwdriving and hammer-drilling modes, with speeds up to 650 and 2,600 rpm and hammer rates up to 9,750 and 39,000 bpm. Makita lists a maximum torque of 1,250 in-lb. These are published specifications, not independent measurements or a ranking against another drill. The other tool in the kit, GDT01Z, is an impact driver for a different fastening interface; it is not another chuck drill and is not the source of GPH01's hammer mode.

The manual lists a 1/2-in chuck opening, a shank-fit limit rather than a half-inch hole rating. It gives different capacity figures by material and bit: 13/16 in for steel and masonry, a 2-in wood auger, a 3-in self-feed bit and a 6-in hole saw. Those values are manufacturer limits for named uses. They do not guarantee a result in every material, bit, hole depth or job. The chuck-based GPH01 is not an SDS rotary hammer and the manual does not turn this combo kit into a chipping tool. For repeated or demanding masonry work, choose the right tool and bit system and follow the instructions, including the torque-reaction and control guidance.

The exact kit includes a matched-capacity pair

GT200D includes two BL4025 2.5Ah XGT packs and DC40RA. The GPH01 manual names BL4025 and BL4040 batteries and DC40RA as applicable equipment, so the listed packs and charger align with the drill's documented accessory family. Confirm the exact model labels and instructions before reusing or replacing power equipment; voltage branding alone is not a substitute for the approved list. Two batteries make this a battery-included purchase rather than an assembly around the GPH01Z bare tool, but no runtime duration follows from the 2.5Ah label.

The kit page also lists a tool bag. It does not separately itemize a drill side handle, even though product imagery may depict one; check the exact seller's package and current manual if that accessory is important. The exact GT200D page reports 12.28 by 6.02 by 20.47 inches and 16.38 pounds as package dimensions and shipping weight. These are not a drill measurement, loaded carry weight or evidence of clearance in a cabinet.

Fit the combo to the whole job

This two-tool kit makes sense to assess when the second impact driver is useful alongside a hammer-capable drill, and when the included pair of 2.5Ah packs, charger and bag match the intended XGT setup. A drill-only package avoids buying a second fastening tool; a larger bundle changes the set rather than the GPH01 drill body. The four-tool GT401M1D1 adds a reciprocating saw and flashlight and lists one 2.5Ah plus one 4.0Ah pack. The five-tool GT500M adds a circular saw and lists two 4.0Ah packs with a wheeled bag. Those exact SKUs have their own box contents, so do not infer them from this kit.

Makita's 7-1/8-in GPH01 manual dimension is overall length, not tool-head length. The manual's 6.0–6.6 lb range changes with battery and attachments; it is not the bare-tool weight or total kit weight. For a close recess, verify the actual chuck, installed bit, side-handle arrangement, hand position and battery clearance rather than treating the box dimension as the operating envelope.

What to check before choosing

Match the exact GT200D suffix and written list to the offer being considered: GPH01Z, GDT01Z, two BL4025 packs, DC40RA and bag. Do not substitute the GPH01Z page's tool-only exclusions for GT200D's included battery and charger, or treat an image as proof of an unlisted accessory. Confirm that hammer drilling is actually appropriate for the planned masonry and that the manual's limits cover the material and bit. No price, availability, seller condition, comparative test or customer experience is asserted here. The most defensible choice is the package whose documented components, approved power equipment and physical access match the work—not simply the kit with the largest tool count.