DEWALT DCD801T1 20V MAX XR Brushless 1/2-in Drill/Driver Kit with FLEXVOLT Battery review

Research-based assessment · exact DEWALT US listing, DCD801/DCD806 Type 1 manual and package image checked 28 October 2026

DCD801T1 pairs the DCD801 brushless drill/driver with one DCB606 FLEXVOLT battery, a charger, a kit bag and a belt hook. The drill itself is the same DCD801 described on the tool-only and QQ2 pages; T1’s meaningful distinction is the supplied power package. This assessment uses manufacturer documentation and does not claim product use, testing or ownership.

The defining difference is one FLEXVOLT pack

The exact US page lists one DCD801 20V MAX XR brushless 1/2-in drill/driver and one DCB606 6Ah FLEXVOLT battery, along with a charger, kit bag and belt hook. Unlike DCD801B, T1 provides a battery and charger rather than requiring a buyer to supply both. Unlike DCD801QQ2, it lists a single DCB606 pack rather than two DCB2104 4Ah POWERPACK packs. The T1 page does not name the charger model in the package list, so check the specific offer if that detail matters. Verify the DCD801T1 suffix rather than relying on a related tool photo: the page’s text is the controlling evidence for the kit contents.

The FLEXVOLT name can cause a platform misunderstanding. DCD801 is a 20V MAX drill/driver, not a 60V tool. The manual’s compatibility table names DCB606 among compatible packs; the T1 page presents that pack in this DCD801 kit. The battery’s multivoltage branding does not change the drill’s function. If you already own a pack, compare its exact model to the manual’s compatibility list and ensure you also have an appropriate charger. DEWALT’s product page uses a 6Ah label for the DCB606 included here; that is a package identifier, not a runtime estimate.

What the DCD801 does—and does not do

DEWALT specifies a brushless motor, a 1/2-in metal ratcheting chuck and a two-speed transmission with no-load ranges of 0–650 and 0–2,000 rpm. A variable trigger provides speed adjustment within those ranges, while the manual lists 1–15 screwdriving settings. The model also has an ANTI-ROTATION system described as sensing excessive tool motion and shutting down, plus an adjustable three-position LED worklight rated at 70 lumens. These documented items support a comparison of controls and included functions; they are not independent proof of power, control or illumination on a specific job.

DCD801 is a drill/driver. In the family manual’s separate mode tables, drilling and screwdriving belong to DCD801; hammer drilling belongs to DCD806. The shared manual should not be read as giving DCD801 a hammer mode. Its DCD801 masonry capacity entry is blank. If a hammer-drill mode or a stated masonry capacity is essential, compare a correctly identified model with that function rather than assuming this kit’s large battery changes what the DCD801 can do.

Capacity guidance is not a performance guarantee

DEWALT’s manual lists maximum-recommended DCD801 capacities: wood auger and paddle bits to 1-1/2 in, wood twist bits to 1 in, self-feed bits to 2-9/16 in, and hole saws to 3 in; for metal it lists twist bits to 1/2 in and hole saws to 1-1/2 in. The table supplies no DCD801 masonry value. These recommendations distinguish bit type and material, and should not be replaced by the chuck’s 1/2-in bit-shank limit. They also do not guarantee that every hole is appropriate under every condition. Read the bit and tool instructions, and plan the setup for the workpiece.

For screwdriving, DEWALT advises beginning at a lower clutch setting and testing on scrap or a hidden area. The manual warns that the drill can stall under overload and twist suddenly, and says to secure or clamp the work. Stop the motor before changing direction or shifting gears. This guidance makes the DCD801’s collar and selector meaningful controls, but no particular torque setting or safe workload can be prescribed without knowing the fastener and material.

How to read DEWALT’s performance language

The DCD801 product page advertises up to 175 holes per charge and a relative output comparison under stated test conditions. These remain manufacturer claims. They do not tell us how long T1 will run in a different material, with another bit or at another drilling depth; this review has not repeated the test. The battery’s 6Ah label and inclusion in the box are useful facts for comparing packages, not a promise of a specific number of holes or hours.

Is T1 the right DCD801 package?

Shortlist DCD801T1 if you want the DCD801 drill/driver and specifically value one included DCB606 FLEXVOLT battery, charger and bag. It avoids the separate battery-and-charger purchase required by DCD801B, while supplying a different battery arrangement from the two-pack DCD801QQ2. A buyer with an existing battery system should compare what is actually missing from their workshop before paying for kit extras.

Choose another configuration if two included packs matter more, or if you already have a compatible battery and want a tool-only package. Look elsewhere if the job requires documented hammer drilling or a manufacturer-stated DCD801 masonry capacity. The checked sources do not settle tool-only weight, whole-tool clearance, absolute output or real-world runtime. Before purchase, verify the model suffix, exact DCB606 pack, charger, bag, return terms and current seller package. This is an evidence-based comparison, not a field test or a claim of current stock.