DEWALT DCD800E2 20V MAX XR Brushless 1/2-in Drill/Driver Kit review

Research-based assessment · exact DEWALT US package page and DCD800/DCD805 Type 1 manual checked 28 October 2026

DCD800E2 is the DCD800 drill/driver in a two-battery POWERSTACK package. DEWALT’s exact US page lists two DCBP034 20V MAX XR compact batteries, one DCB112 charger, a kit bag and belt hook. The drill itself remains the same DCD800 model reviewed under other suffixes; the reason to inspect E2 separately is its all-DCBP034 battery bundle. This is a source-based assessment, not a product test.

Both listed packs are the same compact model

The E2 page lists two DCBP034 packs, not one DCBP034 plus a DCB203. DEWALT’s separate DCBP034 page describes it as a 20V MAX XR compact battery compatible with 20V MAX tools and explains its compact footprint relative to DCB203. The page’s advertised percentage comparisons are framed against DCB203 and are not universal performance results. It does not state an amp-hour figure in the product details captured here, so this review does not add one.

That distinction separates E2 from DCD800D1E1’s mixed POWERSTACK/DCB203 set, DCD800D2’s two DCB203 2.0Ah packs, and P1’s single DCB205 5.0Ah. If you already own compatible 20V MAX batteries, consider whether two more packs and the DCB112 charger are useful or duplicative. If compact pack dimensions are the specific reason for this package, verify the exact DCBP034 model in the seller’s written list instead of relying on a general “POWERSTACK kit” phrase.

The machine is still a non-hammer drill/driver

DEWALT describes the DCD800 as a brushless 20V MAX XR tool with a 1/2-in metal ratcheting chuck, variable trigger and two speed ranges from 0–650 to 0–2,000 rpm. The maker calls the tool-head length 6.37 in, and lists a three-position, three-mode LED with a 70-lumen maximum and 20-minute spotlight shutoff. These are manufacturer specifications, not observations from use.

Do not confuse the battery name with a tool mode. The DCD800/DCD805 Type 1 manual’s mode chart gives DCD800 drilling and screwdriving collar positions 1–15; it assigns hammer drilling to DCD805. The DCD800 masonry capacity cell is blank. If your essential job requires documented hammer mode or a stated masonry capacity, another DCD800 battery suffix will not solve it—the underlying machine is still DCD800.

Setup, capacity and safety checks

For screws, the numbered collar adjusts torque and the manual says a higher number corresponds to more torque. A cautious start and a test on scrap help avoid damaging a fastener or workpiece. In drill mode the clutch does not release; DEWALT warns of stall and sudden twist if the drill is overloaded. Clamp the work, use a stable grip and let the motor stop before changing speed or direction. The manual’s battery instructions and product page’s stated 20V MAX platform are the right starting point for pack compatibility—not a guess based on a similar-looking battery.

The manual’s DCD800 maximum-recommended figures are 1-1/2-in wood auger/paddle, 1-in wood twist, 2-9/16-in self-feed and 3-in wood hole-saw capacity; for metal it lists 1/2-in twist and 1-1/2-in hole saw. These are manufacturer recommendations, not independent performance measurements. The half-inch chuck is a shank-opening specification and does not mean every half-inch hole is appropriate.

Is E2 the useful package?

E2 is a reasonable candidate when the buyer wants the DCD800 drill plus two same-model compact batteries, charger and bag in the exact carton. It is less compelling if battery capacity in amp-hours is an essential comparison, because that figure is not stated on the captured DCBP034 product page; do not fill that gap from an unrelated pack listing. It also does not supply hammer drilling, a bit set or a stated DCD800 masonry capacity. The bag is listed by DEWALT, but its durability has not been independently checked.

The exact DCD800 page advertises comparative UWO claims under named battery pairings; no absolute output figure or independent test result is established here. Runtime, charge duration, actual holes per pack, heat, balance and service life remain unknown. DEWALT’s captured US notice list did not show a DCD800 entry on 28 October 2026, which is only a dated index check.

Before buying, confirm the full E2 suffix, two DCBP034 batteries, DCB112 charger, bag and belt hook; confirm that your required battery capacity is documented; and read the current tool manual for the task. DEWALT DCD800E2 product page · DEWALT DCBP034 battery page · DCD800/DCD805 Type 1 manual