DEWALT DCD1007WW1 20V MAX XR Brushless 1/2-in Three-Speed Hammer Drill Kit with 8Ah Battery review

Bottom line: DCD1007WW1 is the battery-included kit variant of DEWALT’s DCD1007 three-speed brushless hammer drill. Its exact US page lists one DCB2108 8Ah battery and one charger alongside the drill, side handle and belt hook. The charger model is not named in the Includes text, so confirm the actual charger with the seller rather than inferring it from a package photo. This is a research-based review, not a test.

Kit contents and battery platform

The DCD1007WW1 package includes one DCD1007 drill, one DCB2108 20V MAX XR 8Ah pack, a charger, side handle and belt hook. The official DCB2108 page calls it an 8Ah battery and says it is compatible with DEWALT 20V MAX tools. The drill manual covers the DCD1007 platform; together, these sources support a 20V MAX battery operating plan. The DEWALT product page does not name the kit charger model in its bullet list. The photo appears to depict a DCB118, but that is a visual clue rather than a confirmed line in the package list. The official list also does not name a bag or case; do not count one on the assumption that another DCD1007 package includes it.

This is materially different from DCD1007B and DCD1007BLR, whose pages describe tool-only configurations and say battery and charger are sold separately. BLR additionally identifies the LANYARD READY attachment point; WW1’s included list does not name that feature. Compare the full SKU before treating a listing as equivalent. An 8Ah pack can be attractive when more capacity is wanted, but amp-hours do not prove a particular runtime, charge interval or number of holes outside a defined test setup.

What the drill is designed to do

The page describes a brushless 20V MAX machine with a 1/2-inch keyless ratcheting nitro-carburized chuck and carbide inserts, a three-speed all-metal transmission, a pivoting three-position work light, and an ANTI-ROTATION shutdown system. DEWALT’s Type 1 manual documents three operating modes: drilling, screwdriving and hammer drilling. It lists screwdriving collar positions 1–11 and warns that the clutch is inactive in drilling and hammer mode. It also instructs users to stop the tool before shifting gears, secure the workpiece and use the included side handle to manage reaction. For hammer drilling, the manual requires a carbide-tipped or masonry bit rated for percussion.

For task planning, the manual’s maximum-recommended-capacities table gives the DCD1007 1-1/2 inches for wood auger and paddle bits, 1 inch for wood twist bits, 3-5/8 inches for self-feed bits and 5 inches for hole saws. It separately lists 1/2-inch sheet-metal twist bits, a 4-inch sheet-metal hole saw, a #9 step bit (1-1/8 inches), a 1-inch carbide-tipped plate-steel cutter and a 1/2-inch carbide percussion bit for masonry. These are manufacturer recommendations and specific bit classes—not actual results from our shop and not a universal guarantee about material, workpiece, bit quality or operator technique. The chuck’s 1/2-inch capacity is a shank limit, not a promise of a 1/2-inch masonry hole in all conditions.

Performance claims and unknowns

DEWALT advertises up to 2,100 in-lb maximum brake torque and up to 275 holes per charge. Its footnote ties the hole-count claim to a DCB2108 battery and a 7/8-inch auger in 1-1/2-inch fir; that is a narrow manufacturer example, not a general runtime or a result independently reproduced here. The exact DCD1007 suffix pages also show different structured maximum-speed values, while the manual documents three gears without numerical ranges. I do not use a single RPM figure to claim that one suffix drills faster. The product page’s assembled dimensions are not treated as tool-only weight or clearance measurements.

The ANTI-ROTATION feature is described as sensing excessive tool rotation and shutting down, with a red status indicator when engaged. That is a maker-described control, not a substitute for the side handle, secure workpiece, proper bit or safe technique. Tool Connect chip compatibility is another management detail; the chip itself is sold separately. If a tether point is essential, review the BLR model rather than assuming WW1 shares the BLR hardware.

Who should consider this package?

The WW1 kit makes sense for someone starting a 20V MAX setup or adding a higher-capacity pack who needs all three documented modes and wants the battery and charger listed with the drill. It is less compelling if you already own compatible power equipment and want tool-only pricing, or if you need BLR’s explicitly advertised tether-ready point. Verify the charger model and all box contents on the seller’s package label, check that the included DCB2108 is the battery you want, and consult the manual for operating and masonry-bit limits. For sustained concrete drilling, compare the job against an SDS rotary hammer rather than expecting a standard hammer-drill chuck to serve every masonry workload.

Sources: DEWALT DCD1007WW1 product page, the page-linked Type 1 manual, and DEWALT’s DCB2108 battery page.