Bosch GSR18V-52B22 18V Brushless 1/2-in Drill/Driver Kit with Two 2Ah Batteries review

The Bosch GSR18V-52B22 is the two-pack version of Bosch's 18V brushless 1/2-in drill/driver kit: its exact Includes line lists two 2Ah batteries, an 18V charger, belt clip and carrying bag. The tool body's stated 5.7-in head falls within an inclusive six-inch limit. The B22 is still a rotation-only drill/driver, and Bosch does not name the battery or charger models.

What changes from B12 is the box

Bosch's exact U.S. route identifies GSR18V-52B22 / 06019S0011. The list names one GSR18V-52 drill/driver, two 18V 2Ah batteries, one 18V charger, a belt clip and a carrying bag. It does not identify either battery or the charger by model. The closely related GSR18V-52B12 page lists one 2Ah pack, not two; the extra pack is the material package difference here. The tool body and its published head length are otherwise the GSR18V-52, so do not infer different modes or chuck limits from the B22 suffix.

The included drill is brushless and has a 1/2-in all-metal keyless chuck, two no-load ranges of 0–500 and 0–1,900 rpm, variable speed and reverse, an LED light, and 20 clutch settings. Its 1/2-in chuck meets a half-inch minimum for bit shanks. That is a chuck-opening threshold; it is not a general promise that the machine should make a half-inch hole in every material. The body has no documented hammer-drilling mode, so the B22 is not a fit for a required masonry-hammer task.

Clearance and torque numbers need context

Bosch calls the head length 5.7 in, placing it below the inclusive six-inch maximum. The product data table separately lists a generic 5.9-in length along with 8.1-in height and 3-in width. These are different manufacturer fields; use the stated head-length value for the site's narrow filter, then check a real opening with the battery, bit, hand and workpiece in position. A sub-six-inch head does not mean every complete drilling setup will fit within a six-inch-deep space.

The Bosch page describes 620 in-lb maximum torque and 460 in-lb hard torque in the highlights. Its technical data table's singular torque field reports 460 in-lb. These product-page labels are not an independent torque measurement, and I keep the table/highlight distinction explicit rather than presenting 620 as a verified result. Likewise, Bosch describes a 2.02-lb tool and rounds the table to 2 lb without enough weighing context to infer a tool-only or battery-fitted mass.

Pack quantity is not pack identity or runtime

Two listed 2Ah batteries give this kit a different planned supply from the one-pack B12. They do not establish runtime, charge time or the exact battery model. The package page calls them 2Ah batteries but leaves the labels unspecified; verify both packs and the charger if a specific Bosch battery family or charging arrangement matters. Do not turn the page-linked application image into a contents count. It visibly shows the GSR18V-52 body, not all two batteries and every B22 package component, so the written list controls the kit description.

The linked GSR18V-52 manual provides the operating context: its GSR column states the 1/2-in chuck and maximum capacities of 1-3/8 in for wood and 3/8 in for mild metal. Those are Bosch-stated limits, not independent tests, and the manual lists no masonry capacity or hammer action. Use the low gear where slower control is appropriate, the higher range for faster rotation when the operation and material permit, and the clutch for screwdriving as the manual directs. Do not infer masonry performance from the 18V platform or chuck size.

When the two-pack configuration is relevant

Compare GSR18V-52B22 if you want a regular drill/driver with a 1/2-in chuck, need the stated short head, and value two 2Ah packs in the same listed package. The second small pack may be more useful than a single-pack box for work that spans a recharge, but that is a package-planning point rather than a runtime claim. For an existing Bosch 18V collection, the missing battery and charger model numbers are a reason to inspect labels and manufacturer compatibility instructions, not to guess from the voltage badge.

Confirm the exact B22 suffix and identifier 06019S0011, two 2Ah packs, charger, clip and bag on the offered contents list. If your work requires hammer drilling, larger capacity, or a known charger model, compare a different, specifically documented configuration. Follow the Bosch manual's setup and safety instructions and check actual clearance with the intended accessory. This is a desk assessment of exact manufacturer documentation—not a claim that the kit was handled, owned or tested, nor a statement about seller stock, prices or customer experiences.

Sources: Bosch's exact GSR18V-52B22 U.S. page is the source for its one-tool/two-pack list and model specifications; the GSR18V-52 operating and safety manual supplies model-family drilling limits. The page-linked manufacturer application image visibly shows the GSR18V-52 body, not the whole package.