Bosch GRD18V-127B26X 18V keyed right-angle drill kit review

Bosch’s exact U.S. GRD18V-127B26X kit page lists a keyed 1/2-inch GRD18V-127 right-angle drill, two EXBA18V-60 6Ah batteries, a GAL12V/18V-80 charger and a chuck key. It is a different purchase from both the bare GRD18V-127N and the 7/16-inch hex-chuck HXB26X kit. The product page’s feature copy calls the drill “GRD18V-127N” in places, so check the B26X kit suffix and the written Includes list rather than carrying over a neighbor’s package details.

The keyed 127 body is not the HX version

The retail identity on Bosch’s exact page is GRD18V-127B26X (06019N5011). Its Includes list names one GRD18V-127 18V high-torque right-angle drill, two EXBA18V-60 EXPERT 6Ah high-power batteries, one GAL12V/18V-80 multi-voltage fast charger and one chuck key. The page’s technical data lists a 1/2-inch chuck, consistent with the keyed base body and included key. However, its promotional text sometimes labels the same kit drill as GRD18V-127N. The visible page does not explain that naming slip; the retail suffix, itemized list, chuck field and matching kit render are the evidence used here for the keyed 127 package. Do not mistake it for the HXB26X package, whose exact list names the 7/16-inch hex GRD18V-127HX.

Capacity claims have a battery footnote

Bosch’s product page claims a brushless motor, up to 1,800 inch-pounds of torque, two speed ranges from 0–550 to 0–1,800 rpm, variable speed, reverse and KickBack Control. Its linked 2025 GRD18V-127/127HX manual confirms those two no-load ranges for the keyed GRD18V-127. The manual’s GRD18V-127 column specifies a 1/2-inch keyed chuck and maximum capacities of 1/2 inch in mild metal, 3-1/4 inches in wood, 1-1/2 inches for auger bits, 2-9/16 inches with a self-feed drill bit, and 5 inches with a hole saw. The table footnote uses an 8Ah CORE18V battery. This kit lists two 6Ah EXPERT batteries, so the footnoted capacity conditions should not be represented as a tested result with the included packs. These are manufacturer figures, not independent drilling results.

The manual’s intended-use section describes drilling wood, metal, ceramic and plastic. It does not document hammer drilling or a screwdriving clutch for this tool. A big keyed chuck may accept the shank of a broad bit range, but that interface is not a promise that any large bit is suitable for a material or available battery. The manual stresses securing work, bracing the tool and controlling reaction torque; Bosch’s KickBack Control is a safeguard, not a substitute for following those directions.

Right-angle shape is not a clearance measurement

The angled head can be relevant when a straight drill body cannot approach a hole, but the maker does not state a separate tool-head length here. Bosch’s page lists 16.6 inches in length, 7.4 inches in height, 3.6 inches in width and 6.8 pounds of weight without stating the weight basis. None is a documented head-length value, and the 6.8-pound number should not be treated as a confirmed bare-tool or battery-equipped weight. Before relying on this form in framing or a cabinet, check the complete tool, battery, chuck key, bit, hand and work-envelope clearances.

Package and compatibility checks

The package includes two named 6Ah packs and a specifically named multi-voltage charger, which is more explicit than a kit page that merely says “18V charger.” Verify that the offer is the B26X suffix, that both EXBA18V-60 packs and the GAL12V/18V-80 charger are on its box list, and that the chuck key is present. Bosch’s battery/charger documentation should be consulted for any replacement or existing component. The exact render is a manufacturer image, not a physical carton inspection.

This configuration is worth comparing for a buyer who needs a keyed right-angle drill and wants two larger listed Bosch 18V packs and a charger in the same package. Compare another tool if you need hammer action, a documented short head or a 7/16-inch hex quick interface. This review is based on Bosch’s exact product page and linked operating material; it does not claim personal use, ownership, independent testing, current price, stock or seller experience.

Sources: Bosch’s exact GRD18V-127B26X page anchors the kit suffix and written package list; the GRD18V-127/127HX manual separates the keyed base drill from the HX interface and supplies the operating table and safety guidance.